3D printed syringe pump
Posted in Hardware
Here’s a syringe pump, plans and specs.
Hat tip to Dibs
Feeds and Forum
Recent comments
- Peter on Neuroscience with particle physics level confidence
- L. on Neuroscience with particle physics level confidence
- Peter on Neuroscience with particle physics level confidence
- L. on Better robots, please.
- David Schoppik on Better robots, please.
- B on Robot arm with a 2p scope attached
- Joe on Sourcing scan mirrors in early 2022
- L. on The Cousa objective, an ultra long working distance, large field-of-view air objective for multiphoton imaging
- Jochen Meyer on The Cousa objective, an ultra long working distance, large field-of-view air objective for multiphoton imaging
- L. on GCaMP6 reporter mice
Tag cloud
3d printing analysis arduino behavior calcium imaging collaboration computing construction course data acquisition dissemination electronics electrophysiology equipment fluorescence funding gadgets imaging jobs labview laser laser cutting machining manipulators materials MATLAB meeting microscopy openness optics osx pcr processing python references robotics two-photon video visual stimuli water jet cutting- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- March 2023
- January 2023
- November 2022
- October 2022
- September 2022
- July 2022
- June 2022
- March 2022
- September 2021
- November 2020
- July 2020
- June 2020
- May 2020
- February 2020
- November 2019
- October 2019
- June 2019
- December 2018
- November 2018
- October 2018
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- November 2016
- September 2016
- August 2016
- July 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- September 2015
- August 2015
- July 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
Very nice! I, too, have designed an open-source syringe pump:
https://hackaday.io/project/1838-Open-Syringe-Pump
Mine does a few things nicer: bidirectionality, fast loading of syringes, and it has a user interface.
But theirs is great too: it costs less, the drive system’s nice, and using a Raspberry Pi gets a lot of cool points.
Both projects are open source, so, everybody wins!
Thanks for writing in, Theo. I was looking for a link to your project. I’ll put another post up.
[…] Walker has a very nice open syringe pump design that has some advantages over another open syringe pump project we’ve covered (though the latter is less […]